Elegoo Jupiter 2 vs Anycubic Photon Mono M7 Pro
Two of the resin 3d printers (msla) in our best resin 3d printers: elegoo saturn & jupiter vs anycubic photon vs creality halot comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: A 16K large-format printer with tank heating
Check price at AmazonBest for: Heated vat, auto-fill and 170 mm/h
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Elegoo Jupiter 2 | Anycubic Photon Mono M7 Pro | Weight |
|---|---|---|---|
| XY pixel size (larger axis)Smaller pixels mean finer detail. Many screens have rectangular pixels (e.g. 16.8 × 24.8 µm); we score the larger figure. | 26 µm | 24.8 µm | 30% |
| Build volumeWidth × depth × height from the spec table, in liters. | 14.68 L | 6.5 L | 30% |
| Max print speedMaker's top Z-speed, usually with its fast resin. Anycubic's Photon P1 series quotes speed at 0.05 mm layers only, so it gets the category median. | Not listed | 170 mm/h | 20% |
| Heated resin vatYes when the maker lists resin or vat heating. Cold resin is a common cause of failed prints in garages and winter rooms. | Yes | Yes | 20% |
| Screen | 16K, 15120 × 6230 | 10.1-inch 14K mono LCD | info |
| XY resolution | 20 × 26 µm | 16.8 × 24.8 µm | info |
| Build volume | 302 × 162 × 300 mm | 223 × 126 × 230 mm (6.5 L) | info |
| Heating | Smart tank heating to 30 °C | Dynamic temperature-control resin vat | info |
| Leveling | Multi-point auto leveling with four force sensors | Leveling-free | info |
| Max speed | Not listed | Not listed | info |
| Speed | Not listed | ≤130 mm/h standard resin; ≤170 mm/h high-speed resin (0.1 mm) | info |
| Resin auto-fill | Not listed | Yes | info |
| LayerPick score | 8.0/10 | 7.0/10 | 100% |
Where each one comes out ahead
Elegoo Jupiter 2
Better published figure on: Build volume.
What we like
- Large volume with fine pixels
- Heated tank
Watch out for
- Speed not published
Anycubic Photon Mono M7 Pro
Better published figure on: XY pixel size (larger axis).
What we like
- Fastest listed here (tied)
- Auto-fill and heated vat
Watch out for
- No power-loss resume
Verdict
On published specs, the Elegoo Jupiter 2 scores higher (8.0 vs 7.0). Specs don't capture sound character or feel, so weigh the pros and cons above too.
- Choose the Elegoo Jupiter 2 if this sounds like you: a 16K large-format printer with tank heating.
- Choose the Anycubic Photon Mono M7 Pro if this sounds like you: heated vat, auto-fill and 170 mm/h.
- Elegoo Jupiter 2: Elegoo: Jupiter 2
- Anycubic Photon Mono M7 Pro: Anycubic: Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro: Anycubic Wiki: M7 Pro