Anycubic Photon Mono M7 Pro vs Elegoo Saturn 4 Ultra 16K
The two most compared 10-inch resin printers.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: Heated vat, auto-fill and 170 mm/h
Check price at AmazonBest for: 16K detail with tank heating and tilt release
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Anycubic Photon Mono M7 Pro | Elegoo Saturn 4 Ultra 16K | Weight |
|---|---|---|---|
| XY pixel size (larger axis)Smaller pixels mean finer detail. Many screens have rectangular pixels (e.g. 16.8 × 24.8 µm); we score the larger figure. | 24.8 µm | 19 µm | 30% |
| Build volumeWidth × depth × height from the spec table, in liters. | 6.5 L | 5.51 L | 30% |
| Max print speedMaker's top Z-speed, usually with its fast resin. Anycubic's Photon P1 series quotes speed at 0.05 mm layers only, so it gets the category median. | 170 mm/h | 150 mm/h | 20% |
| Heated resin vatYes when the maker lists resin or vat heating. Cold resin is a common cause of failed prints in garages and winter rooms. | Yes | Yes | 20% |
| Screen | 10.1-inch 14K mono LCD | 10-inch 16K mono LCD, 15120 × 6230 | info |
| XY resolution | 16.8 × 24.8 µm | 14 × 19 µm | info |
| Build volume | 223 × 126 × 230 mm (6.5 L) | 211.68 × 118.37 × 220 mm | info |
| Speed | ≤130 mm/h standard resin; ≤170 mm/h high-speed resin (0.1 mm) | Not listed | info |
| Heating | Dynamic temperature-control resin vat | Smart tank heating to 30 °C | info |
| Resin auto-fill | Yes | Not listed | info |
| Leveling | Leveling-free | Not listed | info |
| Max speed | Not listed | 150 mm/h | info |
| Release | Not listed | Tilt release | info |
| Camera | Not listed | Live camera with light | info |
| LayerPick score | 7.0/10 | 6.9/10 | 100% |
Where each one comes out ahead
Anycubic Photon Mono M7 Pro
Better published figure on: Build volume, Max print speed.
What we like
- Fastest listed here (tied)
- Auto-fill and heated vat
Watch out for
- No power-loss resume
Elegoo Saturn 4 Ultra 16K
Better published figure on: XY pixel size (larger axis).
What we like
- Finest pixels with a heated tank
- Camera
Watch out for
- Slightly smaller volume than the 12K Saturn 4
Verdict
Elegoo has finer 14 × 19 µm pixels and a camera; Anycubic lists 170 vs 150 mm/h and resin auto-fill. Both heat the resin.
- Anycubic Photon Mono M7 Pro: Anycubic: Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro: Anycubic Wiki: M7 Pro
- Elegoo Saturn 4 Ultra 16K: Elegoo: Saturn 4 Ultra 16K
Related comparisons
Resin 3D Printers (MSLA)Elegoo Saturn 4 Ultra 16K vs Creality Halot-X1Resin 3D Printers (MSLA)Elegoo Jupiter 2 vs Anycubic Photon Mono M7 MaxResin 3D Printers (MSLA)Anycubic Photon P1 Max vs Elegoo Jupiter 2Resin 3D Printers (MSLA)Elegoo Mars 5 Ultra vs Anycubic Photon Mono 4 UltraResin 3D Printers (MSLA)Elegoo Saturn 4 Ultra (12K) vs Elegoo Saturn 4Resin 3D Printers (MSLA)Anycubic Photon Mono M7 Pro vs Anycubic Photon Mono M7Resin 3D Printers (MSLA)Anycubic Photon Mono M7 Pro vs Anycubic Photon P1Resin 3D Printers (MSLA)Anycubic Photon P1 Max vs Anycubic Photon Mono M7 ProResin 3D Printers (MSLA)Elegoo Jupiter 2 vs Anycubic Photon Mono M7 Pro Full rankingBest Resin 3D Printers: Elegoo Saturn & Jupiter vs Anycubic Photon vs Creality Halot (2026) TopicAll resin 3d printers