Anycubic Photon P1 Max vs Anycubic Photon Mono M7 Pro
Two of the resin 3d printers (msla) in our best resin 3d printers: elegoo saturn & jupiter vs anycubic photon vs creality halot comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: The largest resin volume here at 18.3 L
Check price at AmazonBest for: Heated vat, auto-fill and 170 mm/h
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Anycubic Photon P1 Max | Anycubic Photon Mono M7 Pro | Weight |
|---|---|---|---|
| XY pixel size (larger axis)Smaller pixels mean finer detail. Many screens have rectangular pixels (e.g. 16.8 × 24.8 µm); we score the larger figure. | 24.8 µm | 24.8 µm | 30% |
| Build volumeWidth × depth × height from the spec table, in liters. | 18.33 L | 6.5 L | 30% |
| Max print speedMaker's top Z-speed, usually with its fast resin. Anycubic's Photon P1 series quotes speed at 0.05 mm layers only, so it gets the category median. | Not listed | 170 mm/h | 20% |
| Heated resin vatYes when the maker lists resin or vat heating. Cold resin is a common cause of failed prints in garages and winter rooms. | Yes | Yes | 20% |
| Screen | 14-inch 12K mono LCD | 10.1-inch 14K mono LCD | info |
| XY resolution | 24.8 × 24.8 µm | 16.8 × 24.8 µm | info |
| Build volume | 285.5 × 214 × 300 mm | 223 × 126 × 230 mm (6.5 L) | info |
| Speed | 15–25 mm/h at 0.05 mm layers | ≤130 mm/h standard resin; ≤170 mm/h high-speed resin (0.1 mm) | info |
| Heating | Dynamic temperature-control vat | Dynamic temperature-control resin vat | info |
| Resin vat | 1.9 L | Not listed | info |
| Weight | 23.1 kg | Not listed | info |
| Resin auto-fill | Not listed | Yes | info |
| Leveling | Not listed | Leveling-free | info |
| LayerPick score | 8.7/10 | 7.0/10 | 100% |
Where each one comes out ahead
Anycubic Photon P1 Max
Better published figure on: Build volume.
What we like
- Largest volume
- Heated vat
Watch out for
- 23 kg
- Speed only quoted at 0.05 mm layers
Anycubic Photon Mono M7 Pro
No scored spec where it is strictly ahead; its case rests on the strengths below.
What we like
- Fastest listed here (tied)
- Auto-fill and heated vat
Watch out for
- No power-loss resume
Verdict
On published specs, the Anycubic Photon P1 Max scores higher (8.7 vs 7.0). Specs don't capture sound character or feel, so weigh the pros and cons above too.
- Choose the Anycubic Photon P1 Max if this sounds like you: the largest resin volume here at 18.3 L.
- Choose the Anycubic Photon Mono M7 Pro if this sounds like you: heated vat, auto-fill and 170 mm/h.
- Anycubic Photon P1 Max: Anycubic: Photon P1 Max
- Anycubic Photon Mono M7 Pro: Anycubic: Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro: Anycubic Wiki: M7 Pro