Anycubic Photon Mono M7 Pro vs Anycubic Photon P1
Two of the resin 3d printers (msla) in our best resin 3d printers: elegoo saturn & jupiter vs anycubic photon vs creality halot comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: Heated vat, auto-fill and 170 mm/h
Check price at AmazonBest for: Ball-screw Z and wave release for viscous resins
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Anycubic Photon Mono M7 Pro | Anycubic Photon P1 | Weight |
|---|---|---|---|
| XY pixel size (larger axis)Smaller pixels mean finer detail. Many screens have rectangular pixels (e.g. 16.8 × 24.8 µm); we score the larger figure. | 24.8 µm | 24.8 µm | 30% |
| Build volumeWidth × depth × height from the spec table, in liters. | 6.5 L | 6.5 L | 30% |
| Max print speedMaker's top Z-speed, usually with its fast resin. Anycubic's Photon P1 series quotes speed at 0.05 mm layers only, so it gets the category median. | 170 mm/h | Not listed | 20% |
| Heated resin vatYes when the maker lists resin or vat heating. Cold resin is a common cause of failed prints in garages and winter rooms. | Yes | Yes | 20% |
| Screen | 10.1-inch 14K mono LCD | 10.1-inch 14K mono LCD | info |
| XY resolution | 16.8 × 24.8 µm | 16.8 × 24.8 µm | info |
| Build volume | 223 × 126 × 230 mm (6.5 L) | 223 × 126 × 230 mm (6.5 L) | info |
| Speed | ≤130 mm/h standard resin; ≤170 mm/h high-speed resin (0.1 mm) | 25–35 mm/h at 0.05 mm layers (standard resin) | info |
| Heating | Dynamic temperature-control resin vat | Dynamic temperature-control vat | info |
| Resin auto-fill | Yes | Not listed | info |
| Leveling | Leveling-free | Not listed | info |
| Z-axis | Not listed | Dual rail + ball screw | info |
| Resin | Not listed | Engineered for 8000 cps resin | info |
| Weight | Not listed | 13.6 kg | info |
| LayerPick score | 7.0/10 | 6.6/10 | 100% |
Where each one comes out ahead
Anycubic Photon Mono M7 Pro
No scored spec where it is strictly ahead; its case rests on the strengths below.
What we like
- Fastest listed here (tied)
- Auto-fill and heated vat
Watch out for
- No power-loss resume
Anycubic Photon P1
No scored spec where it is strictly ahead; its case rests on the strengths below.
What we like
- Heated vat
- Handles thick engineering resins
Watch out for
- Speed only quoted at 0.05 mm layers
Verdict
Same screen and volume, both heated. P1 adds a ball-screw Z and steel platform for 8000 cps resins; M7 Pro adds auto-fill and is faster.
- Anycubic Photon Mono M7 Pro: Anycubic: Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro: Anycubic Wiki: M7 Pro
- Anycubic Photon P1: Anycubic: Photon P1