Anycubic Photon Mono M7 Pro vs Anycubic Photon Mono M7
Two of the resin 3d printers (msla) in our best resin 3d printers: elegoo saturn & jupiter vs anycubic photon vs creality halot comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: Heated vat, auto-fill and 170 mm/h
Check price at AmazonBest for: The M7 Pro's screen and volume without heating
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Anycubic Photon Mono M7 Pro | Anycubic Photon Mono M7 | Weight |
|---|---|---|---|
| XY pixel size (larger axis)Smaller pixels mean finer detail. Many screens have rectangular pixels (e.g. 16.8 × 24.8 µm); we score the larger figure. | 24.8 µm | 24.8 µm | 30% |
| Build volumeWidth × depth × height from the spec table, in liters. | 6.5 L | 6.5 L | 30% |
| Max print speedMaker's top Z-speed, usually with its fast resin. Anycubic's Photon P1 series quotes speed at 0.05 mm layers only, so it gets the category median. | 170 mm/h | 150 mm/h | 20% |
| Heated resin vatYes when the maker lists resin or vat heating. Cold resin is a common cause of failed prints in garages and winter rooms. | Yes | No | 20% |
| Screen | 10.1-inch 14K mono LCD | 10.1-inch 14K mono LCD | info |
| XY resolution | 16.8 × 24.8 µm | 16.8 × 24.8 µm | info |
| Build volume | 223 × 126 × 230 mm (6.5 L) | 223 × 126 × 230 mm (6.5 L) | info |
| Speed | ≤130 mm/h standard resin; ≤170 mm/h high-speed resin (0.1 mm) | ≤90 mm/h standard; ≤150 mm/h high-speed resin | info |
| Heating | Dynamic temperature-control resin vat | Not supported | info |
| Resin auto-fill | Yes | Not supported | info |
| Leveling | Leveling-free | Not listed | info |
| LayerPick score | 7.0/10 | 4.6/10 | 100% |
Where each one comes out ahead
Anycubic Photon Mono M7 Pro
Better published figure on: Max print speed, Heated resin vat.
What we like
- Fastest listed here (tied)
- Auto-fill and heated vat
Watch out for
- No power-loss resume
Anycubic Photon Mono M7
No scored spec where it is strictly ahead; its case rests on the strengths below.
What we like
- Same optics as the Pro
Watch out for
- No heating or auto-fill
Verdict
Same 14K screen and 6.5 L volume. The Pro adds vat heating and auto-fill and lists 170 vs 150 mm/h.
- Anycubic Photon Mono M7 Pro: Anycubic: Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro: Anycubic Wiki: M7 Pro
- Anycubic Photon Mono M7: Anycubic: Photon Mono M7