Sovol SV08 Max vs Sovol SV08
Two of the open-frame 3d printers in our best open-frame 3d printers: bambu a1, prusa mk4s, kobra, neptune, sovol sv08 comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: A 500 mm cube with 50 mm³/s flow
Check price at AmazonBest for: An open CoreXY with a 350 mm bed and 40,000 mm/s²
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Sovol SV08 Max | Sovol SV08 | Weight |
|---|---|---|---|
| Build volumeWidth × depth × height from the spec table, in liters. Anything over 45 L gets full marks; see the large-format guide for the giants. | 125 L | 42.3 L | 25% |
| Multi-color system offeredYes when the maker sells or builds in a multi-filament system for this printer. | No | No | 20% |
| Max accelerationHigher acceleration shortens real print times more than headline top speed. Prusa doesn't publish it, so its models score at the lowest published acceleration in the category. | 40000 mm/s² | 40000 mm/s² | 20% |
| Max nozzle temperature300 °C or more lets an open printer handle PETG-CF, TPU and short ABS runs. | 300 °C | 300 °C | 15% |
| Max bed temperatureHotter beds hold PETG and ABS flat on bigger plates. | 100 °C | 100 °C | 10% |
| Built-in camera listedYes when a camera ships built in. Optional add-ons count as No. | Yes | Yes | 10% |
| Build volume | 500 × 500 × 500 mm | 350 × 350 × 345 mm | info |
| Max nozzle temp | 300 °C | 300 °C | info |
| Max bed temp | 100 °C | 100 °C | info |
| Speed / acceleration | 700 mm/s / 40,000 mm/s² | 700 mm/s / 40,000 mm/s² | info |
| Max flow | 50 mm³/s | Not listed | info |
| Camera | 1280 × 720 | Yes | info |
| Chamber | Reserved interface for an optional heated chamber module | Not listed | info |
| Z motors | Not listed | 4 independent | info |
| Assembly | Not listed | 90% pre-assembled | info |
| LayerPick score | 7.0/10 | 6.8/10 | 100% |
Where each one comes out ahead
Sovol SV08 Max
Better published figure on: Build volume.
What we like
- 500 mm cube
- High flow
Watch out for
- No multicolor system listed
Sovol SV08
No scored spec where it is strictly ahead; its case rests on the strengths below.
What we like
- Big and fast
- Camera
Watch out for
- No multicolor system listed
- Needs about an hour of assembly
Verdict
On published specs, the Sovol SV08 Max scores higher (7.0 vs 6.8). Specs don't capture sound character or feel, so weigh the pros and cons above too.
- Choose the Sovol SV08 Max if this sounds like you: a 500 mm cube with 50 mm³/s flow.
- Choose the Sovol SV08 if this sounds like you: an open CoreXY with a 350 mm bed and 40,000 mm/s².
- Sovol SV08 Max: Sovol: SV08 Max
- Sovol SV08: Sovol: SV08