Sovol SV08 Max vs Prusa XL+ (5-head)
Two of the open-frame 3d printers in our best open-frame 3d printers: bambu a1, prusa mk4s, kobra, neptune, sovol sv08 comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: A 500 mm cube with 50 mm³/s flow
Check price at AmazonBest for: A 360 mm toolchanger with up to five heads
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Sovol SV08 Max | Prusa XL+ (5-head) | Weight |
|---|---|---|---|
| Build volumeWidth × depth × height from the spec table, in liters. Anything over 45 L gets full marks; see the large-format guide for the giants. | 125 L | 46.7 L | 25% |
| Multi-color system offeredYes when the maker sells or builds in a multi-filament system for this printer. | No | Yes | 20% |
| Max accelerationHigher acceleration shortens real print times more than headline top speed. Prusa doesn't publish it, so its models get the category median. | 40000 mm/s² | Not listed | 20% |
| Max nozzle temperature300 °C or more lets an open printer handle PETG-CF, TPU and short ABS runs. | 300 °C | 290 °C | 15% |
| Max bed temperatureHotter beds hold PETG and ABS flat on bigger plates. | 100 °C | 115 °C | 10% |
| Built-in camera listedYes when a camera ships built in. Optional add-ons count as No. | Yes | No | 10% |
| Build volume | 500 × 500 × 500 mm | 360 × 360 × 360 mm (46.7 L) | info |
| Max nozzle temp | 300 °C | 290 °C | info |
| Max bed temp | 100 °C | Not listed | info |
| Speed / acceleration | 700 mm/s / 40,000 mm/s² | Not listed | info |
| Max flow | 50 mm³/s | Not listed | info |
| Camera | 1280 × 720 | Not listed | info |
| Chamber | Reserved interface for an optional heated chamber module | Up to 50 °C with optional enclosure, 60 °C with enclosure + heater | info |
| Toolheads | Not listed | 1–5, active toolchanger | info |
| Heatbed | Not listed | 16 individually controlled tiles, up to 115 °C (a summary card on the page says 120 °C) | info |
| Weight | Not listed | 30 kg | info |
| LayerPick score | 7.0/10 | 7.0/10 | 100% |
Where each one comes out ahead
Sovol SV08 Max
Better published figure on: Build volume, Max nozzle temperature, Built-in camera listed.
What we like
- 500 mm cube
- High flow
Watch out for
- No multicolor system listed
Prusa XL+ (5-head)
Better published figure on: Multi-color system offered, Max bed temperature.
What we like
- Five materials with minimal purge waste
- Up to five toolheads
Watch out for
- Enclosure is optional
- No built-in camera
Verdict
Sovol has the bigger 500 mm cube and 40,000 mm/s²; Prusa has up to five toolheads and a 115 °C segmented bed.
- Sovol SV08 Max: Sovol: SV08 Max
- Prusa XL+ (5-head): Prusa: XL+ five-head