Flashforge Creator 5 vs Prusa XL+ (5-head)
Two of the open-frame 3d printers in our best open-frame 3d printers: bambu a1, prusa mk4s, kobra, neptune, sovol sv08 comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: Four independent toolheads without the enclosure
Check price at AmazonBest for: A 360 mm toolchanger with up to five heads
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Flashforge Creator 5 | Prusa XL+ (5-head) | Weight |
|---|---|---|---|
| Build volumeWidth × depth × height from the spec table, in liters. Anything over 45 L gets full marks; see the large-format guide for the giants. | 16.8 L | 46.7 L | 25% |
| Multi-color system offeredYes when the maker sells or builds in a multi-filament system for this printer. | Yes | Yes | 20% |
| Max accelerationHigher acceleration shortens real print times more than headline top speed. Prusa doesn't publish it, so its models get the category median. | 30000 mm/s² | Not listed | 20% |
| Max nozzle temperature300 °C or more lets an open printer handle PETG-CF, TPU and short ABS runs. | 320 °C | 290 °C | 15% |
| Max bed temperatureHotter beds hold PETG and ABS flat on bigger plates. | 120 °C | 115 °C | 10% |
| Built-in camera listedYes when a camera ships built in. Optional add-ons count as No. | Yes | No | 10% |
| Build volume | 256 × 256 × 256 mm | 360 × 360 × 360 mm (46.7 L) | info |
| Toolheads | 4 independent | 1–5, active toolchanger | info |
| Max extruder temp | 320 °C | Not listed | info |
| Max bed temp | 120 °C | Not listed | info |
| Print / travel speed | 300 / 600 mm/s | Not listed | info |
| Acceleration | 30,000 mm/s² | Not listed | info |
| Camera | Built-in Full HD | Not listed | info |
| Net weight | 14 kg | Not listed | info |
| Max nozzle temp | Not listed | 290 °C | info |
| Heatbed | Not listed | 16 individually controlled tiles, up to 115 °C (a summary card on the page says 120 °C) | info |
| Chamber | Not listed | Up to 50 °C with optional enclosure, 60 °C with enclosure + heater | info |
| Weight | Not listed | 30 kg | info |
| LayerPick score | 7.6/10 | 7.0/10 | 100% |
Where each one comes out ahead
Flashforge Creator 5
Better published figure on: Max nozzle temperature, Max bed temperature, Built-in camera listed.
What we like
- Toolchanger multicolor
- 320 °C nozzle and 120 °C bed
Watch out for
- No enclosure (the Pro adds one)
Prusa XL+ (5-head)
Better published figure on: Build volume.
What we like
- Five materials with minimal purge waste
- Up to five toolheads
Watch out for
- Enclosure is optional
- No built-in camera
Verdict
Both are toolchangers. Prusa offers five heads and 46.7 L; Flashforge offers four heads, 320 °C vs 290 °C and a camera.
- Flashforge Creator 5: Flashforge: Creator 5
- Prusa XL+ (5-head): Prusa: XL+ five-head