Bambu Lab P2S vs Flashforge Adventurer 5M Pro
Two of the enclosed 3d printers in our best enclosed 3d printers: bambu h2, prusa core one+, creality k2, kobra s1 max comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: A compact enclosed CoreXY with AMS support
Check price at AmazonBest for: A small, enclosed 220 mm CoreXY
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Bambu Lab P2S | Flashforge Adventurer 5M Pro | Weight |
|---|---|---|---|
| Build volumeWidth × depth × height from the maker's spec table, in liters. For dual-nozzle Bambu H2 models we use the single-nozzle volume. | 16.8 L | 10.6 L | 25% |
| Max nozzle temperature300 °C covers PETG, ABS and ASA. 320–350 °C opens up PC, PPA and PPS blends. | 300 °C | 280 °C | 20% |
| Active chamber heatingYes when the maker lists a chamber heater, not just an enclosure that traps bed heat. | No | No | 15% |
| Multi-color system offeredYes when the maker sells or builds in a multi-filament system for this printer (AMS, CFS, ACE, MMU, CANVAS or toolheads). | Yes | No | 15% |
| Max accelerationTop speed figures are similar across brands; acceleration decides how fast real parts with corners print. Prusa doesn't publish it, so its models get the category median. | 20000 mm/s² | 20000 mm/s² | 15% |
| Built-in camera listedYes when a camera ships built in. Optional add-ons count as No. | Yes | Yes | 10% |
| Build volume | 256 × 256 × 256 mm | 220 × 220 × 220 mm | info |
| Max nozzle temp | 300 °C, hardened steel | Not listed | info |
| Max bed temp | 110 °C | 100 °C | info |
| Filtration | Activated carbon VOC + particulate | Not listed | info |
| Max speed / acceleration | 600 mm/s / 20,000 mm/s² | 600 mm/s / 20,000 mm/s² | info |
| Max flow | 40 mm³/s | Not listed | info |
| Camera | 1080p 30 fps | Not listed | info |
| Net weight | 14.9 kg | Not listed | info |
| Max extruder temp | Not listed | 280 °C | info |
| Shell | Not listed | Enclosed, HEPA + activated carbon filtration | info |
| Noise | Not listed | 50 dB low-noise mode | info |
| Multicolor | Not listed | Not supported (Flashforge FAQ) | info |
| LayerPick score | 4.3/10 | 1.8/10 | 100% |
Where each one comes out ahead
Bambu Lab P2S
Better published figure on: Build volume, Max nozzle temperature, Multi-color system offered.
What we like
- Half the weight of the H2 series
- Filtration built in
Watch out for
- No chamber heater listed
- 300 °C nozzle limit
Flashforge Adventurer 5M Pro
No scored spec where it is strictly ahead; its case rests on the strengths below.
What we like
- Compact
- Built-in camera and filtration
Watch out for
- Smallest volume and lowest nozzle temp here
- No multicolor upgrade
Verdict
P2S is bigger (256 vs 220 mm), hotter (300 vs 280 °C) and supports AMS multicolor; both are enclosed with cameras.
- Bambu Lab P2S: Bambu Lab: P2S specs
- Flashforge Adventurer 5M Pro: Flashforge: Adventurer 5M Pro