Bambu Lab A1 vs Flashforge AD5X
Two of the open-frame 3d printers in our best open-frame 3d printers: bambu a1, prusa mk4s, kobra, neptune, sovol sv08 comparison, lined up spec by spec. Every figure comes from the manufacturer pages linked below, and the scores use the same published formula as the full ranking.
Affiliate disclosure: We earn a commission if you buy through links on this page, at no extra cost to you. It never affects our rankings, which come from the published scoring formula. As an Amazon Associate I earn from qualifying purchases. Learn more.
Best for: A 256 mm bed-slinger with full auto-calibration and AMS lite
Check price at AmazonBest for: A 220 mm CoreXY with a 4-color IFS module
Check price at AmazonSpec-by-spec comparison
Green marks the better published figure. "Not listed" means the manufacturer doesn't publish it.
| Spec | Bambu Lab A1 | Flashforge AD5X | Weight |
|---|---|---|---|
| Build volumeWidth × depth × height from the spec table, in liters. Anything over 45 L gets full marks; see the large-format guide for the giants. | 16.8 L | 10.6 L | 25% |
| Multi-color system offeredYes when the maker sells or builds in a multi-filament system for this printer. | Yes | Yes | 20% |
| Max accelerationHigher acceleration shortens real print times more than headline top speed. Prusa doesn't publish it, so its models get the category median. | 10000 mm/s² | 20000 mm/s² | 20% |
| Max nozzle temperature300 °C or more lets an open printer handle PETG-CF, TPU and short ABS runs. | 300 °C | 300 °C | 15% |
| Max bed temperatureHotter beds hold PETG and ABS flat on bigger plates. | 100 °C | 110 °C | 10% |
| Built-in camera listedYes when a camera ships built in. Optional add-ons count as No. | Yes | No | 10% |
| Build volume | 256 × 256 × 256 mm | 220 × 220 × 220 mm | info |
| Max hotend temp | 300 °C | Not listed | info |
| Max bed temp | 100 °C | 110 °C | info |
| Max speed / acceleration | 500 mm/s / 10,000 mm/s² | Not listed | info |
| Max flow | 28 mm³/s | Not listed | info |
| Multicolor | AMS lite | 4-color IFS module included | info |
| Camera | Low-rate camera (up to 1080p) | Expandable (add-on) | info |
| Noise | Silent mode under 48 dB | Not listed | info |
| Net weight | 8.3 kg | Not listed | info |
| Max extruder temp | Not listed | 300 °C | info |
| Speed / acceleration | Not listed | 600 mm/s / 20,000 mm/s² | info |
| Enclosure | Not listed | Sold as a kit | info |
| LayerPick score | 5.5/10 | 4.9/10 | 100% |
Where each one comes out ahead
Bambu Lab A1
Better published figure on: Build volume, Built-in camera listed.
What we like
- Calibrates Z-offset, bed, vibration and flow for every print
- AMS lite multicolor
Watch out for
- Bambu lists ABS/ASA/PC as not recommended
Flashforge AD5X
Better published figure on: Max acceleration, Max bed temperature.
What we like
- Multicolor included
Watch out for
- Small volume
- Camera is an add-on
Verdict
Bambu has more volume (256 vs 220 mm) and a camera; Flashforge has 20,000 vs 10,000 mm/s² and includes its 4-color module.
- Bambu Lab A1: Bambu Lab: A1 tech specs
- Bambu Lab A1: Bambu Lab: A1
- Flashforge AD5X: Flashforge: AD5X